The agria 9600 remote control mower has a 12 month warranty, excluding normal wear and tear, provided the servicing has been completed as per the maintenance schedule.

Yes, the agria 9600 remote control mower has a robust heavy-duty design with sensor technology to protect against overload, auto shutoff if the blades experience strong resistance (e.g. hitting a stone) and software for easy error analysis and remote maintenance. All of the electronics are protected from dust, vibrations and moisture and are easily accessible in a central electrical switch box. The maintenance-friendly design means maintenance can be completed quickly at regular intervals.

The agria remote control mower can be operated from 300 meters away. It is recommended to stand at least 3 meters above and to the side of the machine. This means you will always have visibility of the machine and the area around it - preventing damage to the machine caused by obstacles while keeping yourself safe too. Also, the machine has an auto shut-down function that will shut off the machine immediately if the remote control unit is too far away from the machine. The user has the ability to control all device functions via remote control and is not exposed to any direct stresses such as vibrations, noise, or exhaust fumes.

The agria remote-control mower has a 24.3 HP (17.9kW) Briggs & Stratton Series 8270, air-cooled 2-cylinder, 4-stroke OHV petrol engine.

The area performance of the agria remote-control mower is up to 10000m²/hour at a driving speed of 5 km/h. The maximum speed of the machine is 10km/h. The agria remote control mower has 4 selectable speed ranges to choose from, with your speed dependent on the type of terrain (e.g. rutted) and the height and type of vegetation that you are mowing. Range 1: 0 – 2.5 km/h continuously Range 2: 0 – 4.0 km/h continuously Range 3: 0 – 6.0 km/h continuously Range 4: 0 – 10.0 km/h continuously

No, the agria remote control mower runs on a caterpillar (crawler) track with non-slip AS profile field tread, is light weight at approximately 653kg (including fuel) and has a low ground pressure of only 0.18kg/cm². The machine can also mow both in forward and reverse, eliminating the need to turn around. Not only does this limit ground damage but it also speeds up the job.

The agria remote control mower can safely mow steep slopes up to 55° or 143%

The agria remote control mower falls under the ISO 9001-certified Agria quality management system to ensure compliance with high quality standards. This forms the basis for continuous improvement and leads to a comprehensive final inspection, so that no machine leaves the factory without a thorough examination.

Yes, the agria remote control mower can be operated in the same area as other remote control devices. If the frequency is disturbed, the remote control unit automatically switches to another frequency in the frequency band. If no other frequency is found, the machine will switch off immediately. There is also an automatic shutdown as soon as the remote control unit and the operator are too far away from the machine.

The agria remote control mower has a total fuel capacity of 20 litres (2 x 10 litre tanks). The amount of fuel is sufficient for an operation of approx. 6 hours. The agria interchangeable tank system means you don't need to stop so often - the machine will draw fuel from one tank first, then switch over to the second tank. The fuel remaining level is always displayed on the screen of the remote control unit and a warning message will appear as soon as the contents of the second tank is running out, therefore, you should never run out of fuel.

The agria remote control mower is a mulching mower with 2 blade carriers, each with 4 pendulum toughened steel blades.

The agria remote control unit is capable of running for up to 8 hours. The battery remaining is displayed on the LCD display of the remote control unit.

The agria remote control mower has a cutting width of 112 cm and a cutting height of approximately 50 - 185 mm.

The dimensions of the agria remote control mower are: 1450 x 1500 x 720-855 mm (L x W x H)

The agria 9600 remote control mower is fitted with... Protective Ejection Flaps which protect against objects, such as stones and wood, being thrown out. The flaps successfully passed the throwing body test and is certified by DLG. Electromagnetic Brakes are fitted to the electric motors ensuring maximum safety on steep slopes. The brakes can even be unlocked manually if needed. Two Emergency Stop Switches - one on the machine and the other on the remote control unit. These switches stops the machine immediately when they are actuated. An Interchangeable Tank System which is easy and safe to use, even on difficult terrain. The two 10 litre canisters can be easily removed, refueled and reconnected. This also means that the agria 9600 remote control mower can be used in water protection areas without any problems. Self-Protection Mechanisms - intelligent software continually communicates with sensors on the machine. Automatic shutdown will occur if the frequency changes and no other frequency is found, or if the operator is too far away from the remote control unit, or to prevent damage as soon as excessive resistance is detected e.g. hitting an obstacle. Automatic Shutdown Software will automatically switch to another frequency in the frequency band if the frequency is disturbed and if no other frequency is found the machine will shut down. Also, the machine will automatically shut down if the operator is too far away from the remote control unit. An Electrical Switch Box protects all electronics from dust, moisture and the rubber on the electrical switch box buffers against vibrations.

The Autec remote control unit has a range of approximately 300m and features include an engine on/off switch, a mower on/off switch, an engine speed switch, a cutting height adjustment switch, a joystick, 2.8" LCD color display (for menu control) and an emergency stop button. The software communicates continuously with sensors and automatically initiates protective measures to prevent damage. A warning notification will be displayed as soon as the machine moves to a critical slope level, needs to be refueled, or the blades will switch off as soon as strong resistance is detected e.g. hitting a stone. Thanks to the remote control unit, you can always be in a safe position. The user can operate all device functions via remote control unit and are not exposed to any direct stresses such as vibrations, dust, noise, or exhaust fumes.

We understand the importance of having access to replacement parts for your mower when you need them, so we stock the fast moving parts such as Blades, Belts and the Hi-Flow oil filters (yellow NOT black) required for the agria remote control mower. We also stock a selection of other parts... contact us with your requirements and we will see if we have the part in stock. If we don't have the parts you need in stock, we can usually supply the parts within 7-14 working days, including the time required for international shipping and customs clearance. Customer satisfaction is our top priority, and we strive to make sure you have the necessary replacement parts available so you can get back to doing what you do with minimal disruption.

We understand the importance of having access to replacement parts for your mower when you need them. For parts that are not readily available in New Zealand, the delivery time can vary depending on the specific part and its availability from the manufacturer. Typically, the process may take anywhere from 7 to14 working days, including the time required for international shipping and customs clearance. Customer satisfaction is our top priority, and we strive to make sure you receive the necessary replacement parts in a timely manner, so you can get back to doing what you do with minimal disruption. We appreciate your patience and understanding as we strive to provide the best solutions for you.

The agria 9600 remote control mower constantly supplies data on the condition of the machine and issues error messages and maintenance instructions on the screen of the remote control unit. In the event of a problem, the status and error messages of the machine can be saved via a USB diagnostic interface. Just email the text file to us and we will provide you with a solution, if possible, or the machine will need to be brought to our workshop where an agria approved & qualified mechanic will have a look at it.

The agria 9600 remote control mower constantly supplies data on the condition of the machine and issues error messages and maintenance instructions on the screen of the remote control unit. In the event of a problem, the status and error messages of the machine can be saved via a USB diagnostic interface. Just email the text file to us and we will provide you with a solution, if possible, or forward the file to the manufacturer, Agria-Werke GmbH, for further assistance. This support is available worldwide.

Yes, training is provided to everyone who purchases a machine from us, including other staff who will be operating the machine. The training is only available in Auckland.